Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
7. Remove the inside handle fixing screw.
CAUTION: Do not apply excessive force on the inside handle link or damage may occur, which could make the inside handle difficult to operate.
8. Remove the door trim panel.
-
Remove 5 fixing screws (1), (3) in order to take off 6 clips (2) from the door panel.
-
Disconnect the tweeter and courtesy light connectors to lift the door trim panel and unlock the engagement of the waist seal section. Then pass
the inside handle through the mounting hole of the trim panel, and detach the trim panel.
9. Remove the inside handle.
10. Remove the tweeter.
Installation
To install, follow the removal steps in the reverse order.