Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Brake Pad: Service and Repair
Rear
Removal
NOTE: If a squealing noise occurs from the rear brake while driving, check the pad wear indicator plate. If the indicator plate contacts the rotor, the
disc pad assembly should be replaced.
-
Draw out two-thirds of the brake fluid from the reservoir.
-
Raise the vehicle and support it with suitable safety stands.
1. Remove wheel and tire assembly.
2. Remove lock bolt (1).
3. Rotate caliper assembly and support the caliper assembly so that the brake hose is not stretched or damaged.
4. Remove pad assembly with shim.
5. Remove clip.
Installation