Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
3. Connect ignition coil connector and ignition coil, then tighten bolt to the specified torque.
Torque: 4 Nm (35 inch lbs.)
CAUTION: Ignition coil assembly #6 is different from ignition coil assembly from #1 to #5. Ignition coil assembly #6 is short type. So, note it
when installing ignition coil assembly of #6.
4. Connect ground cable and tighten bolts to the specified torque.
Torque: 9 Nm (78 inch lbs.)
5. Install positive crankcase ventilation hose.
6. Install engine cover mating with the dowels.