Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
![background image](/honda/passport_ex_4wd/v6-3165cc_3.2l_dohc_mfi/Page-468002.png)
B. Properly apply a 4.5 mm (0.7 inch) wide bead of sealant (TB-1207C or equivalent) to mounting surface of crankcase.
Sealant bead must be continuous.
-
The crankcase must be installed within 5 minutes after sealant application to prevent premature hardening of sealant.
C. Install crankcase, tighten crankcase fixing bolts to the specified torque.
Torque:10 Nm (87 inch lbs.)
2. Install oil pan
A. Remove residual sealant, lubricant and moisture from mounting surface, then dry thoroughly.
B. Properly apply a 4.5 mm (0.7 inch) wide bead of sealant (TB-1207C or equivalent) to mounting surface of oil pan.
Sealant beat must be continuous.
-
The crankcase must be installed within 5 minutes after sealant application to prevent premature hardening of sealant.
C. Install oil pan, tighten oil pan fixing bolts to the specified torque.
Torque:10 Nm (87 inch lbs.)
3. Install starter and tighten fixing bolts.
Torque: 40 Nm (30 ft. lbs.)