honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Compressor Clutch|Service and Repair > < Compressor Clutch Check|Page 5491
Page 5
background image

Steps 32 - 42

Test Description

IMPORTANT:  Do not engage the A/C compressor clutch with the engine running if an A/C mode is not selected at the A/C control switch.

The numbers below refer to the step numbers on the Diagnostic Chart:

3. This a test determine is the problem is with the refrigerant system. If the switch is open, A/C pressure gauges will be used to determine if the

pressure switch is faulty or if the system is partially discharged or empty.

4. Although the normal complaint will be the A/C clutch failing to engage, it is possible for a short circuit to cause the clutch to run when A/C has not

been selected. This step is a test for that condition.

7. There is an extremely low probability that both relays will fail at the same time, so the substitution process is one way to check the A/C Thermostat

relay. Use a known good relay to do a substitution check.

Compressor Clutch|Service and Repair > < Compressor Clutch Check|Page 5491