Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
![background image](/honda/passport_ex_4wd/v6-3165cc_3.2l_dohc_mfi/Page-2214001.png)
Turn Signal Bulb: Service and Repair
Rear Turn Signal Light Bulb
Removal
1. Disconnect the battery ground cable.
2. Remove the rear combination light assembly.
-
Refer to the Taillight Bulb removal step.
3. Remove the bulb (1)
-
Remove the rear turn signal light socket by turning it counterclockwise.
-
Remove the bulb by turning it counterclockwise while pushing it at the same time.
Installation
To install, follow the removal steps in the reverse order.