Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Brake Bleeding: Service and Repair
Flushing Brake Hydraulic System
FLUSHING BRAKE HYDRAULIC SYSTEM
It is recommended that the entire hydraulic system be thoroughly flushed with clean brake fluid whenever new parts are installed in the hydraulic
system. Approximately one quart of fluid is required to flush the hydraulic system. The system must be flushed if there is any doubt as to the grade of
fluid in the system or if fluid has been used which contains the slightest trace of mineral oil. All rubber parts that have been subjected to a
contaminated fluid must be replaced.