Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Timing Belt: Service and Repair
Timing Belt Removal and Engine Timing
THIS ARTICLE HAS BEEN UPDATED BY TSB 02-047
TIMING BELT REMOVAL
NOTE:
Left and right engine callouts are from the driver's seat.
1. Disconnect battery ground cable.
2. Remove air cleaner assembly.
3. Remove radiator upper fan shroud from radiator.
4. Move drive belt tensioner, to loose side, using wrench then remove drive belt.
5. Remove cooling fan assembly four nuts, then the cooling fan assembly.
6. Remove cooling fan drive pulley assembly.
7. Remove idle pulley assembly.
8. Remove serpentine belt tensioner assembly.
9. Remove power steering pump assembly.
10. Remove crankshaft pulley assembly using J-8614-01 crankshaft holder, hold crankshaft pulley remove center bolt, then the pulley.