Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Crankshaft Position Sensor: Service and Repair
Removal
1. Disconnect battery ground cable
2. Wiring connector from crankshaft position sensor.
3. Remove crankshaft position sensor from cylinder block.
Installation
1. Install crankshaft position sensor into the cylinder block.
Before installation,apply small amount of engine oil to the O-ring.
Torque: 10 N.m (87 lb.in)
2. Reconnect wiring connector to crankshaft position sensor.