Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
15. Remove tour bolts of SRS coil assembly and remove the SRS coil assembly from the combination switch.
Installation
1. Set cancel cam and SRS coil in position and install the SRS coil to combination switch by tightening the tour bolts to a specified tightening torque
with tour bolts.
Torque. 0.5 N.m (0.05 kg.m / 0.4 lb.ft)
2. Insert the horn terminal into the connector NO.12 and bind the combination switch harness and SRS coil harness with a tape.
3. Install the combination switch assembly (with SRS coil) to steering lock of steering shaft and tighten the tour bolts to a specified tightening torque.
4. Connect the wiring harness connectors (10) located at the base of steering column.
5. Turn the SRS coil clockwise to full, return about 3 turns and align the neutral mark.