Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
7. Loosen the inflator module fixing bolt from behind the steering wheel assembly using a T0RX(R) driver or equivalent until the inflator module can
be released from steering assembly. Disconnect the yellow 2-way SRS connector and horn lead located behind the inflator module, then remove
inflator module.
WARNING: THE INFLATOR MODULE SHOULD ALWAYS BE CARRIED WITH THE TRIM COVER AWAY FROM YOUR
BODY AND SHOULD ALWAYS BE LAID ON A FLAT SURFACE WITH ' THE URETHANE SIDE UP. THIS IS NECESSARY
BECAUSE FREE SPACE IS PROVIDED TO ALLOW THE AIR CUSHION TO EXPAND IN THE UNLIKELY EVENT OF
ACCIDENTAL DEPLOYMENT. OTHERWISE, PERSONAL INJURY MAY RESULT.
8. Apply a setting mark (1) across the steering wheel and shaft so parts can be reassembled in their original position. Move the front wheels to the
straight ahead position, then use steering wheel remover J-29752 to remove the steering wheel.