Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Steering Transfer Gear: Service and Repair
REMOVAL
1. Remove universal joint bolt (steering shaft side).
2. Remove universal joint bolt (steering unit side).
3. Loosen fixing bolt and nut and remove transfer gear assembly with shim.
INSPECTION AND REPAIR
The transfer gear assembly cannot be disassembled. If damage or abnormal condition are found, replace the entire transfer gear assembly.
INSTALLATION
1. Install transfer gear assembly with shim and tighten bolt and nut to the specified torque.
Torque: 54 Nm (40 ft. lbs.)
2. Connect universal joint (both side) and tighten the bolt to the specified torque.
Torque: 31 Nm (23 ft. lbs.)