Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
8. Remove bolt and plate.
9. Remove nut assembly.
10. Remove camber shims and note the positions and number of shims.
11. Remove caster shims and note the positions and number of shims.
12. Remove upper control arm assembly.
13. Remove nut.
14. Remove plate.
15. Remove bushing by using remover J-29755.
16. Remove fulcrum pin.
INSPECTION AND REPAIR
Make necessary pans replacement if wear, damage, corrosion or any other abnormal conditions are found through inspection.
Check the parts:
-
Upper control arm
-
Bushing
-
Fulcrum pin
INSTALLATION