Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Stabilizer Bar: Service and Repair
Stabilizer Link
REMOVAL
1. Remove fuel tank.
2. Remove the speed sensor cable from the upper link.
3. Remove bolt, nut, rubber plate and protector.
4. Remove upper link.
INSPECTION AND REPAIR
Make necessary corrections or parts replacement if wear, damage, corrosion or any other abnormal condition are found through inspection.
1. Upper link
2. Rubber bushing
-
Remove the rubber bushing by using remover J-43008.