Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
7. Use a dry rag to remove any remaining dust or debris. If the area is wet, dry it with an air nozzle.
8. Temporarily install both type A reinforcement brackets using the original lower trailing link front mounting nuts, C-clamps, and new body mount studs
and nuts.
NOTE:
^ When securing the C-clamp on the passenger's side, be sure not to contact the brake lines on the inside of the frame rail.
^ On some 2000 models and all 2001-02 models, you need to remove the fuel tank protector mounting bolt from the driver's side. * Save the bolt; it's
required for the temporary and the final installation of the driver's side type A reinforcement bracket.*