Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
1. Install wheel pin.
-
Place the hub on a wood workbench or a block of wood approx. 6" by 6" to protect the wheel stud ends and threads.
-
Insert a wheel stud using a hammer.
Be sure the wheel stud is started squarely and seats completely.
2. Align scribe marks(1) and attach the hub to the disc, then tighten the bolts to the specified torque.
Torque: 103 Nm (76 ft. lbs.)
3. Use installer J-36829 and grip J-8092, then install the inner bearing by driving it into the hub.