Passport EX 4WD V6-3165cc 3.2L DOHC MFI (2001)
![background image](/honda/passport_ex_4wd/v6-3165cc_3.2l_dohc_mfi/Page-2256002.png)
3. Remove the window regulator handle.
-
Remove the clip on the rear side of the regulator handle using a wire.
4. Remove the screw while pulling the inside lever toward you and then remove the inside handle.
5. Remove the 1 screw at the pull case.
6. Pull out the trim panel at the 8 clip positions.
-
Disconnect the power window switch connector.
7. Remove the power window switch and pull case, if equipped.