Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Lock & Guide Bolts
3. Lock bolt.
4. Guide bolt.
5. Caliper assembly.
6. Support bracket with pad assembly.
-
Take care not to damage the flexible brake hose when removing the support bracket.
7. Pad assembly with shim.
-
Mark the lining locations if they are to be reinstalled.
8. Clip.
Install
Clip
1. Clip.
Pad Assembly With Shim
2. Pad assembly with shim.
-
Apply special grease (included in (OEM) kit) (approx 0.2 g) to the both contacting surfaces of inner shims. Wipe off extruded grease after
installing.