Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
/Page-1750002.png)
Clip
1. Clip
Pad Assembly With Shim
Applying Grease To Contacting Surfaces Of Inner Shims
2. .Pad assembly with shim.
-
Apply special grease (included in (OEM) kit) (approx 0.2 g) to the both contacting surfaces of inner shims. Wipe off extruded grease after
installing.
Calliper Assembly
3. Caliper assembly.
-
Use C-clamp to bottom the piston into the caliper bore. Be careful not to damage the piston dust boot.
-
Do not damage the flexible hose by twisting or pulling it.