Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Brake Pad: Testing and Inspection
Front
Front & Rear Disc Brakes
Brake Pads Inspection
PAD THICKNESS
Check the outer pad by looking at each caliper from above. Check the thickness on the inner pad by looking down through the inspection hole in
the top of the caliper. Whenever the pad is worn to about the thickness of the pad base, the pad should be removed for further measurements. The
pad should be replaced anytime the pad thickness (t) is worn to within 1.0 mm (0.039 in) of the pad itself.
NOTE: The disc pads have a wear indicator that makes a noise when the pad wears to a degree where replacement is required.