Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Secondary Piston Assembly
2. Secondary piston assembly.
-
Lubricate the piston cups on the secondary piston assembly with rubber grease.
-
Take care not to scratch the piston cup when installing the piston assembly
NOTE: Do not remove the spring from the piston
3. Primary piston assembly
-
Lubricate the piston cups on the primary piston assembly with rubber grease.
-
Take care not to scratch the piston cup when installing the piston assembly
Removing Snap Ring
4. Snap ring.
-
Depress the primary piston and install the snap ring.
5. Gasket
Removing Stopper Bolt
6. Stopper bolt.
-
Depress the primary piston and install the stopper bolt with new gasket.
Spec