Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
![background image](/honda/passport_lx_2wd/v6-3.2l_sohc_(6vd1)/Page-499001.png)
Camshaft: Testing and Inspection
General Inspection
1. Use a micrometer to measure the cam lobe height and uneven wear.
-
Replace the camshaft if either the lobe height or the uneven wear exceeds the specified limit.
2. Use a micrometer to measure the diameter and the uneven wear of the camshaft journals.
-
Replace the camshaft if the diameter or the uneven wear exceeds the specified limit.
3. Place the camshaft on V-blocks. Slowly rotate the camshaft and measure the runout with a dial indicator.