Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Crankshaft: Testing and Inspection
Out-of Round and Taper
1. Carefully set the crankshaft on the V-blocks. Slowly rotate the crankshaft and measure the runout. If the crankshaft runout exceeds the specified
limit, the crankshaft must be replaced.
-
Runout 0.04 mm (0.0015 inch)
2. Measure the diameter and the uneven wear of main journal and crank pin. If the crankshaft wear exceeds the specified limit, crankshaft must be
replaced.