Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
4. Valve spring [6]
-
Attach the valve seat to the upper spring seat. The painted area of the valve spring should be facing downward.
5. Split collar and upper spring seat. [5]
-
Use a spring compressor to push the valve spring into position.
-
Install the spring seat split collar.
-
Set the split collar by tapping lightly around the head of the collar with a rubber hammer.
-
Use the valve spring compressor: J-39251, or equivalent.
6. Rocker shaft assembly (Intake side) [4]
7. Rocker shaft assembly (Exhaust side) [3]
8. Camshaft assembly [2]
9. Camshaft bracket fixing bolts [1]