Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
![background image](/honda/passport_lx_2wd/v6-3.2l_sohc_(6vd1)/Page-611001.png)
Oil Pan: Service and Repair
Removal
NOTE: Before starting, perform the following:
-
Disconnect battery ground cable.
-
Drain engine oil.
-
Lift vehicle by supporting the frame.
-
Remove front wheels.
1. Oil level dipstick
-
Remove a dip stick from level gage tube.
2. Stone guard
3. Radiator under fan shroud
4. Suspension crossmembers
-
Remove fixing bolts, 2 pieces each per side.
5. Flywheel dust cover
6. Pitman arm and idler arm
-
Use the special tool J-29107, or equivalent to remove pitman arm from the steering unit.
-
Remove four fixing bolts four idler arm.
7. Axle housing assembly
-
Remove two bolts and nuts from housing isolators on both sides.
NOTE: At this time, raise and support the axle with a garage jack.
8. Oil pan fixing bolts and nuts