Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
REMOVAL
Preparation:
Battery ground cable
Drain engine coolant
Discharge and recover refrigerant (W/Air conditioning).
1. Heater unit
2. Case (Temperature control)
-
Remove the case (Temperature control) from the heater unit.
3. Rod
4. Sub-lever
5. Door lever
-
Pull out the door lever while raising up the catch of the door lever.
6. Clip
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following point:
1. Apply grease to sub-lever and to the abrasive surface of the heater unit.