Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
![background image](/honda/passport_lx_2wd/v6-3.2l_sohc_(6vd1)/Page-2528001.png)
Headlamp Bulb: Service and Repair
REMOVAL
Preparation:
Disconnect the battery ground cable.
1. Headlight bulb
^
Disconnect the connector.
^
Release the socket retaining clips.
CAUTION: The halogen light bulb produces heat and temperature rises high, therefore, if the glass surface is contaminated it will be burnt by
heat leaving stains which will not come out. This may reduce the illuminating power or damage the bulb due to thermal deformation during
evaporation. In order to prevent this problem, do not touch the glass surface with your fingers.
INSTALLATION
To install, follow the removal steps in the reverse order.