Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Brake Light Switch: Service and Repair
Stop Light Switch Replacement
Adjusting Top Light Switch
REMOVE
1. Connector
2. Lock nut
3. Switch
INSTALL
1. Switch
^
Adjust the stop light switch to the specified clearance (between switch housing and brake pedal) by rotating the switch housing.
Spec
Clearance 0.5 - 1.0 mm (0.02 - 0.04 in.)
NOTE: Do not attempt to force the push rod into position during the stop light switch installation and adjustment procedure.
2. Lock nut
3. Connector