Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Axle Nut: Specifications
Preload Adjustment
1. Tighten the hub nut to 29 Nm (22 lb. ft.) then fully loosen the the nut.
2. Tighten the hub nut to the value given below, using a spring scale on the wheel pin.
New bearing and New oil seal
Bearing Preload: 20 N - 25 N (4.4 lb. - 5.5 lb.)
Used bearing and New oil seal
Bearing Preload: 12 N - 18 N (2.6 lb. - 4.0 lb.)
If the measured bearing preload is outside the specifications, adjust it by loosening or tightening the bearing nut.