Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Catalytic Converter: Service and Repair
Manual Transmission
REMOVAL
NOTE:
^
Remove battery negative cable.
^
Raise the vehicle and support with suitable safety stands.
(Left Hand Side)
1. Disconnect 02 sensor harness connector.
2. Remove transfer under cover.
3. Remove 3rd crossmember.
4. Remove the front exhaust pipe fixing nuts. Disconnect front exhaust pipe at exhaust manifold.
(Right Hand Side)
5. Disconnect 02 sensor harness connector.
6. Disconnect front exhaust pipe at exhaust manifold.
7. Disconnect front exhaust pipe at center exhaust pipe.
8. Remove the front exhaust pipe.
INSTALLATION
-
To install follow the removal steps in the reverse order.
-
Tighten the fixings to the specified torque.
Torque:
Front Exhaust Pipe Fixing Bolts - 43 N.m (32 lb-ft)
Front Exhaust Pipe Fixing Nuts - 67 N.m (49 lb-ft)
Transfer Under Cover Fixing Bolts - 46 N.m (34 lb-ft)