Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Throttle Cable/Linkage: Service and Repair
REMOVAL
1. Loosen the Adjusting Nut on the Cable Bracket mounted on the Common Chamber.
2. Remove Cable Clip.
3. Disconnect Accelerator Pedal Control Cable (on Throttle Valve side).
4. Disconnect Accelerator Pedal Control Cable (on Accelerator Pedal side).
5. Remove Grommet.
6. Remove Accelerator Pedal Control Cable.
INSTALLATION
To install, follow the removal steps in the reverse order.
6. Connect Accelerator Pedal Control Cable.
5. Install Grommet.
4. Connect Accelerator Pedal Control Cable (on Accelerator Pedal side).
3. Connect Accelerator Pedal Control Cable (on Throttle Valve side).
2. Connect Cable Clip.
1. Install Adjusting Nut.