Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Powertrain Control Module (PCM): Service and Repair
REMOVAL
Preparation: Disconnect Negative Battery Cable.
1. Remove the Front console
2. Remove the Wiring harness connector
-
Disconnect the Powertrain Control Module (PCM) wiring harness connectors from PCM.
3. Remove the PCM.
-
Remove two PCM retaining screws.
-
Remove two brackets from PCM.
INSTALLATION
To install follow the removal steps in the reverse order.
3. Install the PCM.
-
Install two brackets to PCM.
-
Install two PCM retaining screws.
2. Install the Wiring harness connector.
-
Connect PCM wiring harness connectors to PCM.
1. Install the Front console.
-
Connect negative (-) battery cable.