Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
![background image](/honda/passport_lx_2wd/v6-3.2l_sohc_(6vd1)/Page-2035002.png)
3. Torsion bar. Apply the setting marks to the torsion bar and lower control arm.
INSPECTION
Make necessary correction or parts replacement if wear, damage, corrosion or any other abnormal condition are found through inspection. Check the
following parts:
a. Torsion bar
b. Height control arm
c. Adjust bolt
d. Rubber seat
INSTALLATION
1. Torsion bar
a. Make sure the bars are on their correct respective sides.
b. Apply grease to the serrated portions.
c. Align the setting marks.
2. Height control arm
a. Apply grease to the portion that fits into the bracket.
b. Align the setting marks.
c. Apply grease to the bolt portion of the end piece.