Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
2. Roll pin. Carefully install roll pin with hammer to avoid damage to valve body etc.
3. Wiring harness. Connect wiring harness to solenoids and main case 4 pin connector.
4. Oil filter. Install oil filter with new gasket, three 13 mm screws.
-
Torque 20 Nm (15 ft. lbs.).
5. Main case oil pan:
a. Install magnet, main case oil pan with new gasket, sixteen 10 mm screws.
-
Torque 11 Nm (96 inch lbs.).
b. Fill transmission through the overfill screw hole of oil pan, using ATF DEXRON III.
c. Connect negative (-) battery cable.