Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
DISASSEMBLE
1. Retaining ring. Compress spring seat using the tool.
NOTE:
-
Do not over-stress the springs and seat. This will cause damage to the spring seat.
a. Remove retaining ring.
b. Release the spring seat.
-
Do not let the spring seat catch in the ring groove.
-
Spring compressor: J-23075 and Adapter: J-23075-12.
2. Spring seat.
3. Springs.
4. Piston.
INSPECTION AND REPAIR
-
Visual check: If any damage, deformation or local wear is found in a retaining ring, return spring, piston seals or spring seat, replace it.
-
Operation check: Shake piston and listen for check ball movement. Replace piston if check ball is missing or falls out.
ASSEMBLE