Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
Seals and Gaskets: Service and Repair
Extension Housing Seal
TOOLS REQUIRED
-
J-36797 Extension Housing oil Seal Installer
-
Or Equivalent
PREPARATION: Disconnect negative (-) battery cable.
REMOVE:
1. Transfer case assembly. Remove transfer case assembly from the vehicle.
2. Rear oil seal. Remove rear oil seal from transmission extension housing.
INSTALL:
NOTE: To install, follow the removal steps in the reverse order, noting the following points;
1. Rear oil seal. Install rear oil seal to transmission extension housing.
-
Extension housing oil seal installer: J-36797.
2. Transfer case assembly:
a. Install transfer case assembly to the vehicle.
b. Connect negative (-) battery cable.
c. Inspect transmission fluid level. See: Fluid - A/T/Testing and Inspection