Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
-
Loosen the bleeder screw to release clutch fluid with air bubbles into the container, then tighten the bleeder screw immediately.
-
Release the clutch pedal carefully. Repeat the above operation until air bubbles disappear from the clutch fluid being pumped out into the
container. During the bleeding operation, keep the clutch fluid reservoir filled to the specified level. Reinstall the rubber can.
b. Bleeding the slave cylinder:
-
Repeat steps (2) through (5) for bleeding the slave cylinder.