Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
4. Bolt: Apply a reference mark to the yoke flange at pinion flange connection.
5. Nut
6. Washer
7. Washer
8. Bolt
9. Lock nut
10. Washer
11. End yoke
12. Bolt: Apply a reference mark to the end yoke at drive shaft connection
13. Bearing strap
INSTALLATION
To install, follow the removal procedure in the reverse order, noting the following steps;
1. Tighten the companion flange lock nut (9).
-
Torque 152 Nm (112 ft. lbs.)
2. Tighten the retainer bolt (12).
-
Torque 21 Nm (15.5 ft. lbs.)
3. Tighten the flange nut (5).
-
Torque 63 Nm (46 ft. lbs.)