Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
![background image](/honda/passport_lx_2wd/v6-3.2l_sohc_(6vd1)/Page-1621002.png)
2. Ball bearing. Set the bearing remover to the bearing and the mainshaft end to remove the bearing.
-
Bearing remover: J-37217.
-
Puller: J-37487.
3. Bearing snap ring.
4. Speedometer drive gear.
5. Clip.
6. Retainer snap ring.
7. Retainer:
8. Thrust plate.
9. Thrust washer and lock ball.
10. Reverse idler gear snap ring. Use a pair of snap ring pliers to remove the snap ring.