Passport LX 2WD V6-3.2L SOHC (6VD1) (1997)
14. 1st gear. Use a bench press and the bearing remover to remove the 1st gear together with the ball bearing.
-
Bearing remover: J-22912-01.
15. 1st inside ring.
16. 1st outside ring.
17. 1st block ring.
18. Needle bearing.
19. Clutch hub snap ring. Use a pair of snap ring pliers to remove the snap ring.
20. 1st-2nd synchronizer assembly.
21. 2nd block ring.
22. 2nd outside ring.
23. 2nd inside ring.
24. 2nd gear:
a. Use a bench press and the bearing remover to remove the 2nd gear together with synchronizer assembly.
-
Bearing remover: J-22912-01