Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
/Page-1435003.png)
1. Wheel stud:
a. Place the hub on a wood workbench or a block of wood approx. 6" by 6" to protect the wheel stud ends and threads.
b. Insert a wheel stud using a hammer. Be sure the wheel stud is started squarely and seats completely.
2. Bolt. Align scribe marks and attach the hub to the disc. Tighten the bolts to 103 Nm (76 ft. lbs.).
3. Inner Bearing Outer Race. Install the outer race: inner bearing by driving it into the hub.
-
Installer: J-36829.
-
Grip: J-8092.
