Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
/Page-571002.png)
1. Install exhaust manifold and tighten bolts to the specified torque.
Torque: 57 Nm (42 ft. lbs.)
2. Install the EGR pipe, tighten bolt and nut on exhaust manifold to specified torque.
Torque: 28 Nm (21 ft. lbs.)
Tighten nut to EGR valve to the specified torque.
Torque: 44 Nm (33 ft. lbs.)
Tighten the bolt for EGR pipe bracket to specified torque.
Torque: 25 Nm (18 ft. lbs.)
3. Install heat protector
4. Install exhaust front pipe and tighten three stud nuts and two nuts to the specified torque.
Torque:
Stud nuts: 67 Nm (49 ft. lbs.)
Nuts: 43 Nm (32 ft. lbs.)
5. Install the torsion bar and readjust the vehicle height.
