Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
/Page-1736002.png)
2. Remove drive plate by using drive plate puller J-33944-A (2) and forcing screw J-33944-4 (1).
3. Remove shim (s).
4. Remove snap ring (1) by using snap ring pliers.
5. Remove pulley assembly by using pulley puller pilot J-38424 (2), pulley puller J-8433 (1) and pulley puller leg J-24092-2 (3).
