Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
/Page-1103001.png)
Axle Disconnect Control Control Unit: Service and Repair
SHIFT ON THE FLY CONTROLLER AND ASSOCIATED PARTS
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front console assembly.
3. Disconnect the connector from the controller.
4. Remove the nut.
5. Remove the controller.
INSTALLATION
1. To install, follow the removal steps in the reverse order, noting the following points.
Torque: Nut (1) 8 Nm (69 inch lbs.)
