Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
/Page-5001.png)
Keyless Entry Module: Service and Repair
Anti-Theft & Keyless Entry Controller
Removal
1. Disconnect the battery ground cable.
2. Remove the glove box from the instrument panel assembly (1).
-
Refer to the Instrument Panel Assembly in Body Structure section.
3. Remove the anti-theft & keyless entry controller (2).
-
Disconnect the connector. Remove two fixing screws.
Installation
To install, follow the removal steps in the reverse order.
