Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
View A
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front console assembly.
3. Disconnect the connector from the control unit.
4. Remove 4 nuts.
5. Disconnect the control unit with brackets.
6. Remove 4 screws.
7. Disconnect the control unit from brackets.
INSTALLATION
To install, follow the removal steps in the reverse order, noting the following points.
Torque: Nut (1) 8 Nm (69 inch lbs.)