Passport LX 4WD V6-3.2L DOHC (6VD1) (2000)
![background image](/honda/passport_lx_4wd/v6-3.2l_dohc_(6vd1)/Page-2334001.png)
Quarter Window Glass: Service and Repair
Side Window Glass
Side Window Glass (SWB)
Removal
1. Remove the quarter trim cover.
2. Remove the side window garnish assembly.
-
Pull out the three clips to disengage them.
3. Remove the side window molding.
4. Remove the side window glass.
Installation
1. Install the side window glass.
-
Clean the areas of the glass and body panel that are to be affixed to each other.
-
Apply the primer to the specified areas of the glass and body panel.
-
Stick the spacer and fastener tape in place in the specified locations.
-
Apply the adhesive to the entire circumference of the glass, as shown in the figure.
-
Insert the glass clips into the panel and then push the glass against the panel to affix it in place.
-
Wipe away any adhesive that oozes out around the edges.
2. Install the side window garnish assembly.
-
Install it securely so that it does not come loose in places.
3. Install the side window molding.
-
insert it securely so that it does not come loose in places.
-
Make sure that there is no water leakage from the side window glass.
4. Install the quarter trim cover.