Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Removal and Installation
HYDRAULIC CONTROL UNIT
Removal
1. Remove brake pipes.
-
After disconnecting brake pipe, cap or tape the openings of the brake pipe to prevent the entry of foreign matter.
2. Remove three bracket fixing bolts.
3. Disconnect red clip from harness connector.
4. Remove harness connector.
5. Remove Electronic Hydraulic Control Unit (EHCU) ASM.
6. Remove EHCU.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
Torque: