Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
![background image](/honda/passport_lx_4wd/v6-3165cc_3.2l_dohc_mfi/Page-1652001.png)
Condenser Fan: Service and Repair
Condenser Fan Motor and Associated Parts
Removal
1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant.
3. Remove radiator grille.
4. Remove condenser fan assembly.
-
Disconnect the fan motor connector and remove the 4 fixing bolts.
5. Remove shroud.
-
Remove the 3 fixing nuts.
-
Loosen the condenser fixing nut and disconnect the fan motor connector from bracket.
6. Remove fan.
-
Remove the fan fixing O-ring and plate.
7. Remove condenser fan motor.
Installation
To install, follow the removal steps in the reverse order, noting the following point:
1. Route the fan motor harness in its previous position, and fix it securely with clip and bracket.