Passport LX 4WD V6-3165cc 3.2L DOHC MFI (2001)
from being mixed into the line.
7. Remove evaporator assembly.
Installation
To install, follow the removal steps in the reverse order, noting the following points:
1. To install a new evaporator assembly, add 50cc (1.7 fl. oz.) of new compressor oil to the new core.
2. Tighten the refrigerant outlet line to the specified torque.
Torque: 25 N.m (18 lb.ft)
3. Tighten the refrigerant inlet line to the specified torque.
Torque: 15 N.m(11 lb.ft)
4. O-ring cannot be reused. Always replace with new ones.
5. Be sure to apply new compressor oil to the O-ring when connecting lines.